How to prevent digital clipping when recording or mastering with Apogee’s Soft Limit
Soft Limit is an Apogee technology first introduced in 1992 on Apogee’s AD-500 converter and it’s still available on the Duet, Quartet, Ensemble and Symphony I/O
This superior analog design prevents the digital clipping that causes distortion by instantaneously rounding off transient peaks before they hit the analog-to-digital converter.
Soft Limit allows several more decibels of apparent level to be recorded,
and works great for an enthusiastic singer or Drummer
Not only can Soft Limit be a great tool for tracking, but can also be a great mastering tool
Here’s a trick you can do to get a few more db out of your track and add some analog warmth.
On Output 1 & 2 in Logic, set up an analog insert by going to Utility_ I/O
Assign the Output… to 3&4 or 5&6… assuming you don’t have monitors connected to these outputs
And choose any pair of inputs. We will choose 1&2
Use two TRS to XLR Male cables to connect the outputs to the Inputs
Set the inputs you chose to +4bdu in the Maestro Input page
And Engage Soft Limit on these two inputs
In the I/O window click on “Ping”… and Logic will set a latency offset Now hit Play
If the output of your mix is low, you may need to boost the gain with the gain plug in.
Put it right before the I/O plug in.
Or you can add a compressor, eq, or anything you wish to shape the sound
As you see we have boosted the gain a fair amount but the mix stays below zero.
Soft Limit is great tool for tracking and mastering… or great effect on a single instrument to give it punch. Now just experiment and find the sound you like.

Mehr über Apogee Ensemble
Erhalten Sie Antworten in der
Apogee Knowledgebase
Sie haben eine Frage?
Fragen Sie einen Apogee Experten
Finden Sie einen Händler mit der
Apogee Händlersuche